User manual

15
1. ID SET.
This function is to set camera ID up to 16 letters on the monitor.
User can choose letters that they want, if user control a joystick up / down / right / left, and user can reselect the
previous letters, if user presses Z/I, Z/O or turn the head of the joystick to right/left
2. OSD DISPLAY.
Set up whether user sets ID and STATUS to display on the
screen in normal operating.
● ID + Status: ‘ID’ and ‘Status’ displayed on the screen
● ID only: Only ‘ID’ displayed on the screen
● Status only: Only ‘Status’ displayed on the screen
● All off: Nothing displayed on the screen
3. H-V REVERSE
Set up H-V reverse mode.
● Normal
● H-REV : You can flip the picture horizontally on the screen.
● V-REV : You can flip the picture vertically on the screen.
● HV-REV : You can flip the picture horizontally and vertically on the
screen.
4. AGC CONTROL
You can set the gain limit in AE mode. Using this setting, you can
select analog gain limit 0 to 10.
▶ off, 1~10
◄◄ CAMERA SETUP p1 ►►
1. ID Set : Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : 05
5. Shutter speed. : AUTO
6. Sharpness level : 20
7. Brightness : 23
8. Color Level :30
9. Slow AE : FAST
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set : Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : 05
5. Shutter speed. : AUTO
6. Sharpness level : 20
7. Brightness : 23
8. Color Level :30
9. Slow AE : FAST
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set : Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : 05
5. Shutter speed. : AUTO
6. Sharpness level : 20
7. Brightness : 23
8. Color Level :30
9. Slow AE : FAST
- NEXT MENU PAGE
◄◄ CAMERA SETUP p1 ►►
1. ID Set : Press F/F Key
2. OSD Display. : ID + Status
3. H-V Reverse. : Normal
4. AGC Control : 05
5. Shutter speed. : AUTO
6. Sharpness level : 20
7. Brightness : 23
8. Color Level :30
9. Slow AE : FAST
- NEXT MENU PAGE