User manual

18
▶ HSBLC MODE
- HSBLE LEVEL: Adjust the HLC Sensitivity by selecting Low, Medium or
High
- MASK STATE: when user select “On” mode, mask areas will be appear
on the monitor.
- Mask color: Select mask color
- Area setting: select areas that you want to mask on the monitor and user
can mask up to 16 zones
▶ BLC MODE : When background of a subject is too bright, subject appears dark since AE is working on the
overall picture. The BLC function increases the visibility of underexposed subject.
- BLC Level: Adjust the BLC Sensitivity by selecting Low, Middle or High
After complete all setup, then move to RETURN MENU PAGE. It is automatically saved.
12. WHITE BALANCE
White Balance has the 4 modes listed below. It can be set according
to surroundings in which camera is placed. When each mode is
changed, the coverage of color temperature is also changed. This
function automatically operates to estimate color temperature by
searching for white point in the scenes with various light source. In
addition, it is possible to reproduce color, especially in sodium and
mercury light.
▶ ATW (Auto Tracking White Balance)
This mode supports color temperature of range 1700K to 11,000K, including sodium and mercury light.
▶ Auto
Color temperature range of this mode is 2900K to 6500K and is the default camera setting.
▶ Indoor/Outdoor
Indoor mode is based on 3600K and Outdoor mode is based on 6500K.
13. FOCUS MODE
Change Focus Mode to hand-worked or auto.
▶ OneShot : Auto Focusing mode works during non-working
after zoom is worked.
▶ Auto: It adjusts the focus automatically as it monitors the
screen.
▶ Manual: User can control the focus by hand-worked.
◄◄ CAMERA SETUP p2 ►►
10. Back Light : Off
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : 28/37
15. DSS Control : 8 Fields
16. Day&Night : Auto
17. 3DNR Control :Middle
- PREV MENU PAGE
- NEXT MENU PAGE
◄◄ CAMERA SETUP p2 ►►
10. Back Light : Off
11. Set Back Light Mode
12. White Balance : Auto
13. Focus Mode :Oneshot
14. Zoom Max Limit : 28/37
15. DSS Control : 8 Fields
16. Day&Night : Auto
17. 3DNR Control :Middle
- PREV MENU PAGE
- NEXT MENU PAGE
◄HSBLC SETUP PAGE ►
- HSBLC LEVEL : 2(0~5)
-MASK STATE : ON
-MASK COLOR :GRAY
-AREA SETTING
01:ON 02:ON 03:ON 04:ON
05:ON 06:ON 07:ON 08:ON
09:ON 10:ON 11:ON 12:ON
13:ON 14:ON 15:ON 16:ON
- NEXT MENU PAGE