User manual

20. TRACE SET PAGE

Set TRACE.

User can regenerate and save a change of the unrestricted

location of ZOOM In/Out and a position of the camera by hand-

worked control with a joystick.

User can see the screen when moves the joystick to Right/Left

after fixing the cursor on the menu

■ How to set TRACE

Move to [SET] after pressing F/N button

Press F/F button – Control scenes that user wants by hand-

worked with a joystick after the message.

“Set Trace: OO%” on the middle of the screen. If user finishes

this part, Move to [SAVE] and press F/F button.

It goes a higher menu after being saved data if user presses

F/F button with a display of the message “Save TRACE”

21. ALRAM CHANNEL ON/OFF

- CH On/Off : Alarm Input – Each channel can be ON/OFF

- Alarm Relay : It can be set On or not when ALARM OUTOUT

PORT operate wrong.

- Active Alarm : It selects ACTIVE OPEN or ACTIVE CLOSE by

tangency when something is wrong. It is ACTIVE when ALARM

INPUT is OPEN in ACTIVE OPEN, it is ACTIVE when ALARM

INPUT is CLOSE in ACTIVE CLOSE

◄◄ CAMERA SETUP p3 ►►

18.STABILIZ On/Off : Off

19. Preset Set & Run Page

20.Trace Set Page

21. Alarm CH On/Off Page

22. Alarm Preset Set Page

23. Privacy Zone Set Page

- PREV MENU PAGE

- NEXT MENU PAGE