User manual

ManualsBrandsD-MAX ManualsHome building and DecorDSC-737SE

- Resume Time Set :

It can select the delay time that the camera move to the place

alarming to observe where wrong signal is sensed.

User can set it for 1sec to 180sec and operate GROUP, TOUR,

SWING again in a preset time. SWING, GROUP, TOUR are

operated

in a preset time when user stops the operating joystick in the case of

not connecting with the ALARM.

Press SWING, GROUP, TOUR keys without stopping of the joystick

to stop the operating completely

(*Stopping the operating with the joystick affects the SET function.)

22. ALARM PRESET SET PAGE

■ The camera can move to a preset point automatically when

something is wrong in each ALRAM CHANNEL.

■ Set a preset point firstly to move if anything wrong, then use

that sets the preset number into each ALARM CHANNEL.

■ PRESET is out of connecting in ALARM CHANNEL No.“0”

■ User can select PRESET number 1 to 250 and set it.

■ Home Position Preset

The camera automatically moves to where master user set

when another user controls the camera to observe other area.

(You can set 1~250 points)

■ Home Position Time

It sets the dwell time in Home Position Preset.

It automatically moves to where observes ordinarily in the

regular time that Master user set in observation of other area

,if set Home Position Preset

(You can set 1~180sec. Set control Home Position Preset

and Home Position Time together for using this function.)

※You can set ALARM setting MENU not only in CAMERA SET MENU MODE, but also a KEYBOARD in direct

23. PRIVARCY ZONE SET

Max

8 privacy zones can be configured for the protection of privacy.

■ How to set privacy zone

- Select a channel by using joystick

- Selected channel will be changed SET mode automatically.

◄◄ CAMERA SETUP p3 ►►

18.STABILIZ On/Off : Off

19. Preset Set & Run Page

22.Trace Set Page

21. Alarm CH On/Off Page

22. Alarm Preset Set Page

23. Privacy Zone Set Page

- PREV MENU PAGE

- NEXT MENU PAGE