VTC-C770WDR WDR True Day and Night (ICR) Camera VITEK • Pixim D8800C Seawolf Digital Imaging System CMOS • 700TVL High Resolution • On Screen Display (OSD) Menu • 3DNR - Three Dimensional Motion Adaptive Noise Reduction • UTC CONTROL - Serial Control over Coax • 0.00008 Lux (F1.
VTC-C770WDR WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. The symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to person.
VTC-C770WDR Table of contents 1. Safety Instructions and Notes…....................................................................................................... 3 2. General Descriptions............................................................................……………………………... 3. Supplied Items......................................................................................……………………………... 4. Part names…………………………….…...................................................…………………………... 5.
VTC-C770WDR 1. Safety Instructions and Notes • Read instructions carefully before putting the camera into operation. • Keep the operating instructions in a safe place for later use. • The Standard Box Camera is designed for indoor use only and it must not be installed where exposed to rain and moisture. • Do not operate the cameras beyond their specified temperature, humidity or power ratings. • Never open the case of the camera because there are precision parts inside. An accident may result.
VTC-C770WDR With 24VAC/12VDC dual power design: - Offers flexibility of installation - Ensures reliability Main features are; • Pixim D8800C Seawolf Digital Imaging System CMOS • 700TVL High Resolution • On Screen Display (OSD) Menu • 3DNR - Three Dimensional Motion Adaptive Noise Reduction • UTC CONTROL - Serial Control over Coax • 0.00008 Lux (F1.
VTC-C770WDR 4. Part Names 4.
VTC-C770WDR 4.2 Rear side view ⓑ ⓐ ⓒ ⓓ ⓐ ⓑ ⓒ ⓓ OSD menu switches (Up/ Down/ Left/ Right / Enter) Video Output Connector (BNC) Power indicator LED Power Input Terminal 5. Installation and commissioning Instructions • Make sure the power is removed before the installation. • To apply power: First connect the low voltage (DC12V or AC24V). Then plug the AC adapter to AC outlets to avoid an improper reset from power jitters and damage from the surge voltage when no load. 5.1.
VTC-C770WDR 5. Rotate Back Focus Adjustment until the optimum focus is achieved. 6. Tighten Back focus Adjustment Lock Screw again. 7. Trim the focus precisely at lens if necessary. Setting for lenses with a variable focal distance (zoom): If the focus changes as the focal distance changes, please proceed as follows. 1. Point the camera at an object with sufficient contrast at a distance of approximately 2 meters 2. Open the iris on the lens 3. Set the maximum focal distance (Tele) at the lens 4.
VTC-C770WDR 7. SETUP 7.1 In the menu Use , buttons to move the menu, button to select or enter. button stands for MENU or ENTER button. , buttons to change the settings and press 7.2 Entering menu Press button longer for than 2 seconds on the back of the camera. 7.3 MAIN Follow the chart below for submenu settings MENU Default Descriptions EXPOSURE Sets COLOR ROLL COMP., AE PREFERENCE, WDR CONTROL and SENSE-UP.
VTC-C770WDR 7.4 EXPOSURE To enter EXPOSURE menu, press EXPOSURE EXPOSURE button at MAIN>EXPOSURE. Default Descriptions Descriptions In NTSC system, the entire color tone on the monitor may continuously Medium level of the dynamic range control for each PRESETs. show reddish and greenish. Increases the dynamic range- Reduces control.theSome highlight area may COLOR ROLL COMP. color rolling under the fluorescent COLOR WDR HIGH lighting. (NTSC system only) washed out.
VTC-C770WDR 7.5 DAY/NIGHT To enter EXPOSURE menu, press button at MAIN>DAY/NIGHT>AUTO... IMPORTANT!!! IMPORTANT!!! DAY->NIGHT and NIGHT->DAY operations must be examined and verified at the final step of the installation. Block the lens for a few seconds for NIGHT mode and release and let it return to DAY mode. If camera stays at NIGHT mode more than 10 seconds, increase N-->D THRES a little and repeat the fore-mentioned steps.
VTC-C770WDR 7.6 3D NR To enter EXPOSURE menu, press 3D NR DEPTH button at MAIN>3D NR Default Descriptions 47 Determines the depth of Three Dimensional Noise Reduction. High value effectively reduces the noise but a comet effect may occur for a fast moving object and vice versa. 7.7 DC LENS or MANUAL LENS To enter EXPOSURE menu, press DC/ MANUAL Default AI LEVEL -24 FOCUS ADJ... - button at MAIN>LENS SELECT>DC... or MANUAL...
VTC-C770WDR 7.8 PICTURE CONTROL To enter the EXPOSURE menu, press PICTURE CONTROL Factory Default WHITE BALANCE ATW NORMAL COLOR SELECT COLOR1 SHARPNESS 2 SATURATION 1 GAMMA button at MAIN>PICTURE CONTROL. 45 Descriptions Sets ATW Normal, ATW Desat, ATW Xtnd or MANUAL. ATW NORMAL – Compensates automatically in range of 2800K-7500K. ATW DESAT – Compensates automatically in range of 2000K-11000K. In the range of 2000-2800K and 7500-11000K, white balance is gradually compensated.
VTC-C770WDR SPECIAL Default Descriptions MOTION OFF If it is set to ON and motion is detected, MOTION message will appear on the monitor. See ‘7.9.1 MOTION ’ for settings. PRIVACY MASK OFF If set to ON, it is available up to 6 privacy masks. See ‘7.9.2 PRIVACY menu’ for settings. SYNC INT1 Sync is fixed to INT1. LANGUAGE VIDEO STANDARD RS485 CONTROL ENGLISH NTSC English is available only. Able to switch NTSC or PAL. Sets the communication parameters of RS-485 for the remote control. 7.9.
VTC-C770WDR 7.9.2 PRIVACY AREA Up to 6 privacy areas can be programmed in size, position and mask color. Use joystick to change size, position and mask color. Right after pressing button at ON, the 1st zone appears on top-left corner in orange. The orange colored zone can be relocated in its location with , , , buttons. , An example of the mask when resizing with , Press , , Image after pressing button again. (1st zone changes to blue) Blue colored zone can be resized with , , buttons.
VTC-C770WDR 7.9.3 RS485 CONTROL RS485 CONTROL Default CAMERA ID 1 ID DISPLAY OFF PROTOCOL VITEK BAUD RATE 2400 Description Determines the camera’s identification (between 1 and 255) Displays camera title on top-left corner of the screen. VITEK is available only. Select 2400/4800/9600/19200 bps. 7.10 D-EFFECT D-EFFECT Default Description FREEZE OFF Image freezes and shows the still image at the moment when set to ON.
VTC-C770WDR 7.16 EXIT MENU-2 Descriptions EXIT Exits menu with discarding any changes. SAVE AND EXIT Exits menu after saving the parameters. FACTORY SET Restores and saves all parameters of factory settings. Camera resets and restarts automatically.
VTC-C770WDR 8. Specifications Model name VTC-C770WDR VTC-C770WDR/PAL Image Device Pixim D8800C Seawolf Digital Imaging System CMOS Effective Pixels 768(H) x 540(V) TV system NTSC PAL Scan frequency. 59.94Hz(V), 15.734Khz(H) 50Hz(V), 15.625Khz(H) Synchronization Internal/Line lock (Default: Internal) H. Resolution 700TV Lines Sensitivity 0.0008Lux at F1.
VTC-C770WDR 9.
VTC-C770WDR 19
VTC-C770WDR VITEK LIMITED PRODUCT WARRANTY VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
VTC-C770WDR 21
VTC-C770WDR 22
28492 CONSTELLATION ROAD VALENCIA, CA 91355 WWW.VITEKCCTV.
