Instruction manual

VTC-C770WDR

7.9.1 MOTION

Up to 4 motion areas and the sensitivity can be set. The sensitivity is applied for all

zones equally.

When adjusting each zone, the zone border line changes color when pressing

button. Green enables enlarging, red enables reducing and white enables moving the

zone with , , , buttons.

To exit MOTION ZONE SETUP, press button for 2 seconds.

SPECIAL

Default

Descriptions

MOTION

OFF

If it is set to ON and motion is detected, MOTION message will

appear on the monitor. See ‘7.9.1 MOTION ’ for settings.

PRIVACY

MASK

OFF

If set to ON, it is available up to 6 privacy masks.

See ‘7.9.2 PRIVACY menu’ for settings.

SYNC

INT1

Sync is fixed to INT1.

LANGUAGE

ENGLISH

English is available only.

VIDEO

STANDARD

NTSC

Able to switch NTSC or PAL.

RS485

CONTROL

Sets the communication parameters of RS-485 for the remote control.