Instruction manual

VTC-C770WDR
8
7. SETUP
7.1 In the menu
Use , buttons to move the menu, , buttons to change the settings and press
button to select or enter.
button stands for MENU or ENTER button.
7.2 Entering menu
Press button longer for than 2 seconds on the back of the camera.
7.3 MAIN
Follow the chart below for submenu settings
MENU
Default
Descriptions
EXPOSURE
Sets COLOR ROLL COMP., AE PREFERENCE, WDR CONTROL and
SENSE-UP.
DAY/NIGHT
AUTO
Sets OFF, AUTO or NIGHT
OFF – Day/Night is disabled and camera works as a normal color
camera.
AUTO – Camera switches DAY from/to NIGHT automatically.
N->D THRES, N<->D DELAY, BURST ON B/W can be set.
See DAY&NIGHT AUTO SETUP for detail.
NIGHT – Forced to remove IR cut filter and switch to B/W.
3D NR
Sets DEPTH of 3D NR.
LENS
SELELT
DC
Selects the lens type, DC or MANUAL.
In sub-menu, Accurate Focus can be set by function of FOCUS
ADJ…
PICTURE
CONTROL
Sets WHITE BALANCE, COLOR SELECT, SHARPNESS,
SATURATION, GAMMA.
SPECIAL
Sets MOTION, PRIVACY MASK, SYNC, LANGUAGE, VIDEO
STANDARD, RS485 CONTROL.
D-EFFECT
Sets FREEZE, FLIP or D-PTZ.
EXIT
Choose EXIT, SAVE AND EXIT or FACTORY SET.