User's Manual

Chapter 10 Using Microsoft Applications 113
Quick C
Quick CQuick C
Quick Correct
orrectorrect
orrect: This gesture opens the alternates menu or the Transcriber
keyboard. To perform this gesture, draw a line straight down then back up
again. If a word is selected the alternates menu will open. If no text is selected,
this gesture launches the Transcriber Keyboard.
Case Change
Case ChangeCase Change
Case Change: Changes the capitalization of a selected letter, word or block
of text. To perform this gesture, draw a line in an upward motion.
Undo
UndoUndo
Undo: Equivalent to pressing "Ctrl-Z" in most applications. To perform this
gesture, draw a line straight up then retrace the same line back down.
Copy
CopyCopy
Copy: Equivalent to pressing "Ctrl-C" in most applications. To perform this
gesture, draw a line from left to right then retrace the same line back to
left.
Cut
CutCut
Cut: Equivalent to pressing "Ctrl-X" in most applications. To perform this
gesture, draw a line from right to left then retrace the same line back to
right.
Paste
PastePaste
Paste: Equivalent to pressing "Ctrl-V" in most applications. To perform this
gesture, draw a line starting from the bottom going up to the right and
without lifting the stylus continue the line back down to the right.
Tab
TabTab
Tab: Equivalent to pressing the "Tab" key. Make sure that the horizontal
part of the gesture is at least two times longer than the vertical part.
Correction
CorrectionCorrection
Correction: Opens the Microsoft Transcriber Correction Window. To perform
the gesture, draw a large checkmark.