User's Manual

134 DOT 320 User’s Guide
Data/File Backup
Since DOT 320 may need to be hardware reset due to an
unexpected problem, be sure to back up the data/files in the
desktop PC, CF memory card, or flash ROM.
To back up the data/files in the desktop PC, connect DOT 320
to the PC. For details about how to connect, refer to 4.
Connecting to Desktop PC. Use the Copy/Paste menu of the
Explorer of the ActiveSync or the Windows Explorer of the
desktop PC to make copies of DOT 320 data/files in the
backup folder (created by the user) of the desktop PC.
Insert the CF memory card in the CF type expanded card slot.
Tap Start > Programs > Windows Explorer, and then tap
Storage Folder. Tap New Folder from the File Menu, and create
a backup folder. Then, copy the data/files in DOT 320 and
paste them in the backup folder of the CF memory card.
The data/files can be copied to the flash ROM of DOT 320. In
this case, it is recommended that only essential PIMs data and
notification data should be copied. Since the flash ROM
contains the programs of DOT 320, its memory capacity
available is limited. Use Start > Programs > PIMS > PIMS
Backup, or run the Windows Explorer. Tap PIMS Backup to
display the files to be backed up in the upper window. Select
the desired data file and select Flash Disk Storage. Then, tap
Backup menu to complete the backup. To restore the files,
select Storage to display the files to be restored in the bottom
window. Select the desired data file and tap the Restore menu
to restore the PIMs data of DOT 320.
Data/file backup
It is recommended that restoring the files using the PIMS
Backup Program should be performed only when the PIMs data
have been lost after hardware reset or due to an unexpected
problem.