User's Manual

DOT400 User Guide - 128 -
Space: Inserts a space at the current text cursor
position. Make sure that the horizontal part of the
gesture is at least two times longer than the vertical
part.
Backspace: Equivalent to pressing "Backspace" on the
keyboard. To perform the gesture, draw a line from right
to left.
Quick Correct: This gesture opens the alternates menu
or the Transcriber keyboard. To perform
this gesture, draw a line straight down then back up again.
If a word is selected the alternates menu will open. If
no text is selected, this gesture launches the
Transcriber Keyboard.
Case Change: Changes the capitalization of a selected
letter, word or block of text. To perform this gesture, draw
a line in an upward motion.
Undo: Equivalent to pressing "Ctrl-Z" in most applications.
To perform this gesture, draw a line straight up then
retrace the same line back down.
Copy: Equivalent to pressing "Ctrl-C" in most
applications. To perform this gesture, draw a line from
left to right then retrace the same line back to left.
Cut: Equivalent to pressing "Ctrl-X" in most
applications. To perform this gesture, draw a line from
right to left then retrace the same line back to right.
Paste: Equivalent to pressing "Ctrl-V" in most
applications. To perform this gesture, draw a line starting
from the bottom going up to the right and without lifting
the stylus continue the line back down to the right.
Tab: Equivalent to pressing the "Tab" key. Make sure
that the horizontal part of the gesture is at least two