User's Manual

DOT400 User Guide - 137 -
and number by clicking the handwritten letter shape and
selecting whether you write the character in that particular
fashion 'often', 'rarely' or 'never'. Since Transcriber will have
fewer letter shapes to search, it will work faster and more
accurately. For example, if you do not use a triangle-shaped
letter 'A' as a lower case letter, check 'never'. This helps
Microsoft Transcriber select the right capitalization, as it will now
consider this shape to be a capital 'A' most of the time. Or, if
you do not write 'Q' similar to '2', disable this way of writing 'Q'
to help Microsoft Transcriber better recognize digit '2'.
Also, to view how Transcriber expects characters to be written,
tap on a character you wish to explore, then click one of the
pictures of this character. It will slowly redraw, showing the
writing sequence.
Letter Shape Selector supports two profiles labeled 'Master' and
'Guest'. You may select which one will be used in the 'File' menu.
Typically, the master profile is used by the primary user. If the
device is temporarily used by another person, they should use
the Guest profile. The Master user will be unaffected by the
settings selected by the Guest user.
You can save or load current profile to or from a file using the
Load and Save commands found on the File menu.
Use Original Settings - Resets the Letter Shape Selector to its
default settings.
Help
Brings up Microsoft Transcriber help file.
Close Transcriber
Shuts down Microsoft Transcriber application.