User's Manual

DOT400 User Guide - 59 -
Power
You can check the battery status of DOT 400 and set the device to be
turned off when idle.
Battery
You can check the battery status of DOT 400.
1. Select Start > Settings > Control Panel.
2. Open the Power icon, and then select the Battery tab. The Battery
tab provides general information on battery conditions.
3. There are three indications of battery status:
Full: Enough battery power.
Low: Low battery power. It is recommended to charge your
battery.
Very Low: Very low battery power. It is recommended to turn
off and charge your DOT 400 not to lose important data.
Power schemes
You can power-off your DOT 400 to reduce battery
consumption and prevent unauthorized use. To set your DOT
400 to be automatically turned off when idle:
1. Select Start > Settings > Control Panel.
2. Open the Power icon, and then select the Power Off tab.
3. Your device will switch to system idle mode after a configured
period of time according to each setting of battery or AC.