User's Manual

ManualsBrandsD-Parts Mobilphon & Zubehoer ManualsAudio EquipmentBLUETOOTH HEADSET

ENGLISH

=========================================

Congratulations

Congratulations on your purchase of the SORA

B-Speech ®headset. This headset allows you to communicate

Wirelessly through your mobile phone and includes a built-in

microphone and earphone. It uses Bluetooth® 2.1 technology,

but is also compatible with mobile phones using Bluetooth®

versi-on 1.1 technology. Your B-Speech® SORA Bluetooth®

head-set uses a built-in Lithium Polymer rechargeable battery,

with long life.

Package Contents

- Headset B-Speech® SORA

- Ear hook

- USB Charger Cable or Optional AC adaptor

- User Guide

The headset can be worn on either ear.

Just clip the ear hook on to the preferred

side.

Charging the internal battery

Before using your headset, please charge the internal

battery. To charge the battery:

1. Connect the USB Charger to a USB port.

2. Plug the adaptor’s connector into the charging port of SORA

3. While charging, the red LED light will stay on and turn

off when charging is complete. You can then unplug

the adaptor's connector from the headset and disconnect

the adaptor from the electrical outlet.

4. During normal use you see the red LED blinking, please

charge the Headset

5. Charging time is about 2 hours

Switching the headset on or off

To switch on:

Press and hold the Multifunctional Key for 3 seconds until the blue LED

turns on.

To switch off:

Press and hold the Multifunctional Key for 3 seconds until the red LED

flashes.

Note, if there are no Bluetooth connection with B-Speech Sora, the Headset will switch off automatically .

After switch on , B-Speech will get in to the Auto pairing mode and connect to the mobiles, which was paired before

Pairing Procedure

Your B-Speech® SORA needs to be paired

to your Bluetooth® mobile phone before it can be used. This is a two part

process; one part is carried out on the headset and the other

is carried out on the mobile phone.

Note that different mobile phones use a different method to go

through the pairing process.

To pair your B-Speech SORA:

1.With your headset turned off, press and hold the Multifunction key 7 sec

Summary of content (4 pages)

PAGE 1
ENGLISH ========================================= Congratulations Congratulations on your purchase of the SORA B-Speech ®headset. This headset allows you to communicate Wirelessly through your mobile phone and includes a built-in microphone and earphone. It uses Bluetooth® 2.1 technology, but is also compatible with mobile phones using Bluetooth® versi-on 1.1 technology. Your B-Speech® SORA Bluetooth® head-set uses a built-in Lithium Polymer rechargeable battery, with long life.
PAGE 2
The LED will alternate rapidly between blue and red, which indicates that the headset is in pairing mode. 2. Use your phone’s menu to search for Bluetooth® audio devices. The phone should indicate it has found the B-Speech® SORA headset. Confirm that you want to Pair your mobile phone and headset together. If you are Unsure how to go through the pairing process on your mobile phone, please consult its user manual. 3. When asked for a pin key, enter: “0000”.
PAGE 3
In the Multilink mode, the last paired Mobile orthe last oín used Mobile will dialled out the the dialled Nr.. Transfering a single call When activating a call, you can press the Multifunction key for 3 second ( a tone appear) to switch the conversation between the head-set and the mobile phone. Press the talk key shortly to return to Headset. Rejecting Calls Press the Multifunction Key for 3 Seconds during an incoming phone ( a tone will appear) call to reject the Call.
PAGE 4
cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.