User's Manual

The LED will alternate rapidly between blue and red, which
indicates that the headset is in pairing mode.
2. Use your phone’s menu to search for Bluetooth® audio
devices. The phone should indicate it has found the
B-Speech® SORA headset. Confirm that you want to
Pair your mobile phone and headset together. If you are
Unsure how to go through the pairing process on your
mobile phone, please consult its user manual.
3. When asked for a pin key, enter: “0000”. Your phone will
confirm that pairing has been successful.
Note that there is usually a time limit to pair devices,
Note for Multilink use.
In order to pair the second mobile with please press the “ Volume – “ for 3 Seconds, The LED will alternate rapidly
between blue and red, please proceed pairing as written .
To activate the Multilink function please press “Volume - and + “ at same time for 3 seconds, B-Speech SORA will
get n to the Multilink Mode, the Blue LED will Blinking twice.
Phone call use
Making a call from the mobile phone
While your mobile phone is paired with your headset, you can
use the mobile phone to make phone calls in the same way as
normal. The only difference will be that the earphone and
microphone functions of the headset will be used inste-ad of
the phone’s.
Answering a call
to answer a call after a ring tone will appear in your
headset., simply press the talk key.
Note that you can set your mobile phone to automatically answer
calls, meaning that you do not even need to press the Multifunctional Key. Please refer to your mobile phone’s user
guide for more information about this setting.
Note; in Multi Link use , you must ending the first call, than you can receive the incoming call of the second mobiles (
to be automatically repaired with second mobile it takes 6 -7 seconds) than you hear the phone ring tone in your
headset and after this you can by pressing the Multifunctional Key receive the call of second mobile.
While you answering a phone call in Multilink function, the Bluetooth Link with the other Mobile will be interrupted with
Ending a call
During a call, press the Multifunction Key to hang up. If the other
person hangs up first, then the call will end automatically.
Voice dialling through the headset
In order to use the voice dial feature of your headset, your
phone must support voice dialling and must have voice tags stored
.
To use voice dialling:
To use voice dialling, the corresponding voice profiles must be stored I your Phone Your Mobile must also support this
function
Press Multifunction Key shortly, You will hear a short tone. Say the voice tag immediately.
Your phone will make the call.
Last number redial
When the headset is in standby mode (not in conversation),
press the volume + key 3 second,( tone appear) and your phone will redial
the last number that you called.
Note: This function only works on Bluetooth®phones that support the Hands-free profile