Owner`s manual

Vision manual page:3
1
11.0 Frame section connector panel
Two track A, B,
Tip = left
Ring = right
Sleeve = shield
CRM 2/PHONES
Tip = left
Ring = right
Sleeve = shield
CRM 1 L/R
Tip = hot
Ring = ground compensation Sleeve = shield
MONO/LEFT/RIGHT
1 = shield
balanced output 2 = hot
3 = cold
Power supply
Speakon connector
Pin -1 = - 17.5 volts
Pin +1 = + 17.5 volts
Pin -2 = Ground
Pin +2 = +48volt
12.0 Connecting the modules
12.1 Mono standard/deluxe module
Description: Connector: Connection:
LINE input
1/4" TRS Tip = hot
balanced Ring = cold
Sleeve = shield
INSERTS
1/4" TRS Tip = return
send & return Ring = send
Sleeve = ground
DIRECT OUTPUTS
1/4" TRS Tip = hot
(tape send)ground compensated Ring = cold
Sleeve = shield
REMOTE CONNECTOR
1/4" TRS Tip =normally connected
(tape return) balanced Ring =normally open
Sleeve = centre contact
MIC input (balanced)
XLR Pin 1 = shield
Pin 2 = hot +
Pin 3 = cold -
12.2 The stereo standard/deluxe module
Description: Connector: Connection:
LINE inputs
1/4" TRS balanced Tip = hot
Ring = cold
Sleeve = shield
REMOTE CONNECTOR 1/4" TRS Tip =normally connected
(tape return) balanced Ring =normally open
Sleeve = centre contact