User's Manual

16
General Specification
5.1 OSD User functions/ Messages
Change the display signal source.
-Select DVI OPTICAL(VP4726F) / DVI DIGITAL / DSUB ANALOG / SDI
/ YPbPr / RGBS / SVIDEO / CVIDEO
-With OSD deactivated, Hot key of the auto adjustment control when it
pressed over 1 second at DSUB ANALOG source.
Input
- With OSD deactivated, Hot key of the contrast control and decreases
the contrast.
- With OSD activated, decreases the adjustment of the selected function.
Minus (-)
- With OSD deactivated, Hot key of the contrast control and increases
the contrast.
- With OSD activated, enter sub menu and increases the adjustment of
the selected function.
Plus (+)
- With OSD deactivated, Hot key of the brightness control and decreases
the brightness.
- With OSD activated, move the OSD cursor downward.
Down (▼)
- With OSD deactivated, Activated to OSD menu.
- With OSD activated, Exit from main menu or sub menu.
Menu
- With OSD deactivated, Hot key of the brightness control and increases
the brightness.
- With OSD activated, move the OSD cursor upward.
UP (▲)
Enable PIP (Picture in Picture) function.
- Select PIP,PBP1,PBP2
PIP
Soft power Turns ON/OFF the monitor.Power
DescriptionKey Name
5. OSD specification
5.1.1 OSD indicator
5.1.2 INPUT source select
VP4726 / VP4726F gives various and very easy graphic user interface. User can easily access function. 8
button keypad, located on the front of monitor, allows the user to make adjustments to various display
parameters using on screen menus easily.
Be sure that your system power and LED is turned on before operating key board.