User's Manual

22
General Specification
Adjust backlight dimming level.
Setting the backlight too low will cause dark image and too high will decrease the backlight lifetime.
BACKLIGHT
Fit to the most appropriate screen on the D-SUB Analog signal
AUTO ADJUST
Adjusts the sharpness of video image
SHARPNESS
Changes the tone of color
SATURATION
Changes the richness of color (Range : Greenish 0~50, Reddish 0~50)
COLOR
Default 6500K color setting
COLOR TEMP 6500K
Default 5600K color setting
COLOR TEMP 5600K
Default 6500K color setting. When USER is selected, Red, Green and Blue values are changeable by the
user
COLOR TEMP USER
*DSUB / DVI OPTICAL / DVI DIGITAL input source
FULL FILL ASPECT
1:1 NORMAL
*YPbPr / RGBS / SDI / CVIDEO / SVIDEO input source
FULL FILL ASPECT 1:1
NORMAL ANAMORPHIC
IMAGE SIZE
PHASE
Do not adjust freely. It will adjust fine state automatically after auto adjustment.
When phase value is wrong, the image have a noise.
CLOCK
Do not adjust freely. It will adjust fine state automatically after auto adjustment.
When frequency value is wrong, the horizontal image have a wrong size or noise.
Press the CONTRAST button to display the ADJUST menu or +,- hot key.
Setting the Contrast too high or too low will cause loss of some grayscales.
CONTRAST
Press the BRIGHTNESS button to display the ADJUST menu or UP,DOWN hot key.
Setting the brightness too high or too low will decrease the amount of visible grayscales.
BRIGHTNESS
Function DescriptionsMenus
5.3 OSD overview
CAUTION : FILL ASPECT,NORMAL
Size are depends on input size ratio
CAUTION : FILL ASPECT,NORMAL,
ANAMORPHIC Size are depends on
input size ratio