Installation & Assembly

INSTALLATION GUIDE
Exclusively Designed • INTERNATIONALLY RECOGNIZED
Please install this product according to the installation guide and all local plumbing codes.
D’VONTZ • 7208 EAST 38th STREET • TULSA, OKLAHOMA 74145 • 918.622.3600 • FAX [phone] • WWW.DVONTZ.COM
THIS INSTALLATION GUIDE REFERENCES
ALL D’VONTZ SPREAD SET FAUCETS
Tools
Thank You for choosing our D’Vontz faucet
We appreciate your choice of our D’Vontz faucet. All the information in this guide is based upon the
latest product information available at the time of publication. We reserve the right to make changes
in product characteristics, packaging, or availability at any time without notice. Please take a few
minutes to review this guide. If you have any questions, please contact us at 918-622-3600.
Before you begin:
Carefully inspect your homes waste and supply lines, stops or shut off values for any sign of damage,
replacing if necessary. NOW is the time to replace them before the installation of your new faucet.
Use extreme caution when connecting all hoses to avoid kinking. During the installation, DO NOT
over tighten the supply lines when attaching them to your faucet. The o’rings provide the water seal
of the supply line.
Observe all local plumbing and building codes. A professional plumber is not required for installa-
tion. Yet, for expert faucet installation, you may need to contact a licensed professional plumbing
contractor in your area.
Tools you may need:
1. Basin wrench
2. Adjustable wrench
3. Channel Lock wrench
4. Screwdriver (Phillips and Slotted)
5. Teflon Tape
6. 100% Clear Silicone (Plumbers putty is NOT recommended as it will void warranties)
Packaging
Unpack your new D’Vontz faucet and inspect for damage or missing pieces.
If any damage is present, promptly contact us for return/replacement options.
No return/refund will be honored to any damaged D’Vontz product post
installation. There is a drain lift rod and four unlabeled boxes for your
D’Vontz faucet. Refer to the reference list below during installation of
your faucet.
1. Faucet handle
2. Faucet handle retaining screw
3. Faucet handle trim body
4. Faucet handle trim ring
5. Valve assembly
6. Washer
7. Retaining nut
8. Valve assembly outlet
9. Valve assembly inlet
10. Y-adapter
11. Spout supply tube
12. Spout supply tube retention nut
13. Grooved washer
14. Spout trim ring
15. Spout
Return the faucet to the carton(s) until you are ready to install it.
Prepare the Sight:
1. Observe all local plumbing and building codes
2. Shut off the water supply to your sink or faucet.
Shutting off water supply to the entire home is also acceptable,
but not required.
14
13
12
11
10
9
8
7
6
5
4
2
3
1
21 3
6
5
4
15
100% SILICONE
MAXIMUM COUNTERTOP
THICKNESS = 2-1/2"