Operating Guide

Cautions, Care and Maintenance:
The plumber should read and review the general and specific care and maintenance of the products to ensure years of beauty and dependable service.
The use of Plumber’s Putty will void finish warranties. The use of any caustic material may harm the finish or interfere with the proper functioning of the
product.
A high level of care and cleanliness should be taken throughout the installation. After installation remove the aerators and flush sediment, metal and other
materials that may cause the product to malfunction.
Improper care and cleaning will void the warranty. Proof of purchase (original sales receipt) must be provided with all warranty claims.
This warranty is extensive in that it covers replacement of all defective parts and even finish, but these are the only two things that are covered. LABOR
CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION, REPAIR, OR REPLACEMENT, AS WELL AS ANY OTHER KIND OF LOSS
OR DAMAGE ARE EXCLUDED.
DO NOT OVER TIGHTEN THE MOUNTING NUT, WHICH COULD DAMAGE THE NUT AND FAUCET.
After every use, it is always best to wipe dry with a soft cloth to prevent water spotting and mineral build-up. We recommend that you clean and wax
regularly. Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls and green Scotch-Brite® heavy-duty scrub sponges. Please
read the cleaning product's instructions, contents and cautions on any new cleaner before using it. Avoid bleach, products that state on the label that they
remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids or caustic agents.
Thank You For Choosing Our D’Vontz Faucet
We appreciate your commitment to D’Vontz quality. Please take a few minutes to review
this manual before starting your installation. If you encounter any installation or
performance
problems, please don’t hesitate to contact us. Thanks again for choosing D’Vontz.
For expert faucet installation, you should contact a licensed
professional plumbing contractor in your area.
Before You Begin
CAUTION: Risk of restricted water flow and product damage.
- Observe all local plumbing and building codes.
-Shut off the water supply to your home at the meter.
-Before installation, unpack the new faucet and inspect it for damage or missing pieces.
(if any damage is present, promptly contact us for return/replacement options. No
return/refund will be honored to any D’Vontz product post installation)
-Return the faucet to the carton until you are ready to install it.
-Carefully inspect your homes waste and supply lines, stops or shut off valves for any
sign of damage. Replace if necessary. NOW is the time to replace them before the
installation of your new faucet.
Tools you may need
-Basin wrench
-Adjustable wrench
-Channel Lock pliers
-Screwdriver (Phillips and Slotted)
-Teflon Tape
-100% Clear Silicone (Plumbers Putty is NOT recommended as it may void warranties)
-Flashlight
You are ready to begin your faucet installation by following the
step-by- step instruction sheets.
MODEL # DV262DL-PC