Installation Guide
INSTALLATION GUIDE
Exclusively Designed • INTERNATIONALLY RECOGNIZED
Please install this product according to the installation guide and all local plumbing codes.
D’VONTZ • 7208 EAST 38th STREET • TULSA, OKLAHOMA 74145
918.622.3600 • FAX 918.622.3649 • WWW.DVONTZ.COM
Model # GS-4411 UM-4414
GS-OF4411 UM-4415
LT-4410 UM-4416
PU-4412 UM-4417
PU-OF4412
Model # GS-4411 UM-4414
GS-OF4411 UM-4415
LT-4410 UM-4416
PU-4412 UM-4417
PU-OF4412
This Product Complies With:
• SGS USTC
• CA-AB1953
• EPA WaterSense
• ASME A112.18.2
• CSA B125.2
• NSF/ANSI 61
Thank You for choosing our D’Vontz Drain Assembly
We appreciate your choice of our D’Vontz drains. All the information in this guide is based upon the
latest product information available at the time of publication. We reserve the right to make changes
in product characteristics, packaging, or availability at any time without notice. Please take a few
minutes to review this guide. If you have any questions, please contact us at 918-622-3600.
Before you begin:
Observe all local plumbing and building codes. A professional plumber is not required for installa-
tion. Yet, for expert installation, you may contact a licensed professional plumbing contractor in your
area.
Tools you may need:
• Adjustable wrench
• Teflon Tape
• 100% Clear Silicone (Plumbers putty is NOT recommended as it will void warranties)
Prepare the Sight:
1. Observe all local plumbing and building codes
2. Shut off the water supply to your sink or faucet. Shutting off water supply to the entire home is
also acceptable, but not required.
Cautions, Care, Maintenance
For best results, keep the following in mind when caring for your D’Vontz drain:
• During installation, only 100% Silicone sealant is allowed. Failure to use a 100% Silicone product
will VOID ALL manufacturer warranties and manufacturer finish warranties. Expressly, the use of
Plumbers Putty is EXPRESSLY PROHIBITED.
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls and heavy duty
scrub sponges. Avoid bleach, bleach products, products that state on the label that they remove
tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids or
caustic agents.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse
and dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces as it could ruin or damage the finishes.
INSTALLATION GUIDE
Exclusively Designed • INTERNATIONALLY RECOGNIZED
Please install this product according to the installation guide and all local plumbing codes.
D’VONTZ • 7208 EAST 38th STREET • TULSA, OKLAHOMA 74145
918.622.3600 • FAX 918.622.3649 • WWW.DVONTZ.COM
This Product Complies With:
• SGS USTC
• CA-AB1953
• EPA WaterSense
• ASME A112.18.2
• CSA B125.2
• NSF/ANSI 61
Thank You for choosing our D’Vontz Drain Assembly
We appreciate your choice of our D’Vontz drains. All the information in this guide is based upon the
latest product information available at the time of publication. We reserve the right to make changes
in product characteristics, packaging, or availability at any time without notice. Please take a few
minutes to review this guide. If you have any questions, please contact us at 918-622-3600.
Before you begin:
Observe all local plumbing and building codes. A professional plumber is not required for installa-
tion. Yet, for expert installation, you may contact a licensed professional plumbing contractor in your
area.
Tools you may need:
• Adjustable wrench
• Teflon Tape
• 100% Clear Silicone (Plumbers putty is NOT recommended as it will void warranties)
Prepare the Sight:
1. Observe all local plumbing and building codes
2. Shut off the water supply to your sink or faucet. Shutting off water supply to the entire home is
also acceptable, but not required.
Cautions, Care, Maintenance
For best results, keep the following in mind when caring for your D’Vontz drain:
• During installation, only 100% Silicone sealant is allowed. Failure to use a 100% Silicone product
will VOID ALL manufacturer warranties and manufacturer finish warranties. Expressly, the use of
Plumbers Putty is EXPRESSLY PROHIBITED.
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls and heavy duty
scrub sponges. Avoid bleach, bleach products, products that state on the label that they remove
tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids or
caustic agents.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse
and dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces as it could ruin or damage the finishes.