User manual

60
Mixer • Layer channel strip
3
• Timbre – This text box displays the name of the loaded timbre and allows to change the Timbre's name by clicking
on it.
• Pan – Panorama, this control corresponds to a Pan knob, which is placed in the Layer master section in the Layer
tab.
• Audio out – Plug-in Audio output, which the Layer's outgoing signal is routed after processing to in a channel
strip. This is conjugated with Audio output in Layer settings section in the Layer tab.
• Volume – This slider controls the output volume ofthe channel strip.
Next to the Volume fader there is the Compressor section, which is basically an insert effect in the channel strip.
• On – LED that turns on/off the compression.
• Attack – The radio group of three LEDs that select one of the three available xed envelopes:
• Fast – Fast attack, slow release.
• Mid – Medium attack, medium release.
• Slow – Slow attack, fast release.
• Ratio – The radio group of three LEDs which select one of three available xed compression ratios:
• 1:2
• 1:4
Mixer - layer's channel strip - compressor