User manual
68
For left and right channels (L, R) there are two LED displays per each (arranged vertically and separated by a straight
line). The numbers on the top are numerators; on the bottom - denominator. The entire fraction represents a note
value, which is a delay time between the taps. The denominator is a rhythmic scale (e.g. 16 means it's a 16th note), the
numerator is a multiplier, and so 3/16 for example is a duration time of the three 16th notes each:
• Full / Dot / Tri – Those three radio LEDs select between three rhythmical modiers (for left and right channel
independently):
• Full – Full note.
• Dot – Dotted note.
• Tri – Triplet note.
Example: On the left channel we set a delay value for 5/16 , on the right channel for 3/16. Additionally for the right
channel we select a Dot modier. These are the resultant delays:
Mixer • FX algorithms
3
FX Delay - tempo based delay time
3/16ths delay time