INSTRUCTION BOOK FOR Cinema Contour® Screen
Included Hardware Large Wall Bracket (47" Long) Installation screws not included Quantities vary by screen size: Screens 80" and smaller viewing width = 1 Screens over 80" to 96" viewing width = 2 Screens over 96" viewing width = 3 Small Wall Bracket (8" Long) Installation screws not included Quantity = 1. Only for screens 80" and smaller viewing width.
Installation Method 1 (Screens 80" And Smaller In Viewing Width) There are four methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The wall bracket diagram shows the type and quantity of bracket(s) supplied based on the size of the screen. 3 Method 1: Screens 80" and smaller in viewing width. Method 2: Screens over 80" up to 96" in viewing width.
Method 2 (Screens Over 80" Up To 96" In Viewing Width) Method 3 (Screens Over 96" In Viewing Width) 1. 1. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. Figure 5 and 6 show the proper orientation for the supplied wall brackets. Secure the wall brackets to wall studs at the desired height.
Method 4 (High Power®) Cleaning Da-Tex®, Dual Vision, Pearlescent, Cinema Vision, High Power®, Da-Mat®, High Contrast Da-Mat®, Audio Vision, High Contrast Audio Vision, High Contrast Cinema Vision and High Contrast Cinema Perf surfaces can be cleaned as follows: Large Wall Bracket 1-Piece Using a white clean cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one direction. Do not use a circular motion.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the factory.
