INSTRUCTION BOOK FOR Cosmopolitan Electrol For Sizes Up To 9' x 12'
Important Safety Instructions When using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces. 3. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat. 4.
Cosmopolitan® Electrol® Installation 4 23⁄32" 1 29⁄32" 5⁄32" 3⁄8" Diameter For Ceiling Installation Overall length A = fabric width + 8". Length B is the distance between wall mounting holes at back of end caps and is the fabric width + 6 1/2".
Screen Adjustment For Screens Without A Built-In Low Voltage Control Surface travel is stopped automatically in the fully opened and closed positions by limit switches that are properly adjusted at Da-Lite. Should it be necessary to adjust for more or less picture drop (viewing area), proceed in the following manner: NOTE: Use a screwdriver or 5/32" Allen wrench to make adjustments. CAUTION: Do not adjust for more drop than what was ordered. At least 1-1/2 wraps of fabric must remain on the roller.
120V Wiring Diagram with Optional Built-In Low Voltage Control RJ-14 Pin-Outs (Tab Is Facing Up) RJ-22 Pin-Outs (Tab Is Facing Up) +12V White Bus (RP Data) Yellow RQ Data Green RQ Data Green +5V Red Ground RJ-22 Jack LED UP +5V Black Supplied RJ-14 cable RJ-22 Jack Up Down Common Bus 5V RJ-22 Inputs BUS RJ-45 Receptacle RJ-45 Jack Front Of Wall Switch 5V COM BUS Down Limit Tactile Button White RJ-45 Pin-Outs (Tab Is Facing Up) P N Black RQ Clock Dry Contacts STO DOW Red Gr
240V Wiring Diagram with Optional Built-In Low Voltage Control Connect Supplied RJ9 Cable to Splitter and Switch, or use 4 Cable Conductor to Connect to Screw Terminals.
Troubleshooting Visit www.da-lite.com to find installation and troubleshooting tutorials. You will also find a link to Live Chat for interactive support and you can contact us by email at info@da-lite.com or by phone at (800) 622-3737 or (574) 267-8101 with any troubleshooting questions. Symptom Screen will not operate. Cause Solution Incorrect line voltage. Verify 115-125V (or 220-240V). If insufficient voltage, rewire incoming electric line. Blown fuse. Replace fuse. Tripped circuit breaker.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment from the factory.
