Datasheet

Rev. 2/08
Options:
❏ Radio Frequency Remote Control.
❏ Radio Frequency Range Extender available
❏ Infrared Remote Control.
❏ Additional 3-button Wall Switch.
❏ 240V Model Available.
❏ Key Locking Cover Plate for 120V or Low Voltage Control (LVC).
Specifications are subject to change without notice.
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Date:
Revised:
SUGGESTED SPECIFICATIONS: Electrical rating 115 VAC 60 Hz 5A. The single motor LVC is used to operate Da-Lite single motor electric
screens from one or more locations, remote control, or for integration into a control panel system. Operated by a 3-button momentary,
dry contact switch. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a
control panel with momentary dry contacts may control the LVC. Control board to be mounted in a galvanized steel housing measuring
2
1
/
4
" H x 4
1
/
2
" W x 10
1
/
2
" L. Standard knockouts provided on housing for
1
/
2
" conduit connections. Control to be listed by Underwriter's
Laboratories.
NOTE: This control cannot be used with the Horizon Electrol
®
, Ascender
®
Electrol
®
, Dual Masking Electrol
®
or Motorized Scenic Roller
screens.
SINGLE MOTOR LOW
VOLTAGE CONTROL (LVC)
SPECIFICATION DATA
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
Toll Free Fax: [phone]
www.da-lite.com
e-mail: [e-mail]
C
Recommended Wire Size: 14-18 AWG
OPTIONAL RF OR IR
REMOTE CONNECTOR
WALL
SWITCH
POWER SOURCE
120VAC 60HZ
SCREEN
EYE AUX
NOTE: Do not seal in – allow access.