Projector Mount Security Cable Kit A-565 Form E-442 Rev. 08 / 10 Caution: Turn off the equipment you are securing. Required Tools: Procedure 1. Remove contents from carton and examine for damaged or missing parts.
Barrel 2. Attach barrels to top of projector feet. See Figure 1. 3. Pass security cable through holes in barrels and up through pipe. See Figure 2. 4. Slip the keyhole disc over the cable terminal and position it so that the bare portion of the cable, just behind the terminal, is inside the thin channel of the keyhole. Lock the cable to the structure using one of the following options as shown in Figure 3 or 4.
