Installation instructions

Ceiling Projector Mount Plenum Cover

CPM

PLC

Form E-436

Rev. 08 / 10

Caution:

This product is designed for ceiling

installation only. Qualified person

nel using the appropriate

fasteners should mount the Plenum Cover. The surface to

which this unit is mounted must be capable of supporting

a static load of four times the combined weight of the

projector and mount. Do not attach to plaster or drywall

alone.

Required Tools:

- 7/16” wrench

Phillips screwdriver

Procedure

1. Remove contents from carton and examine for damaged or missing parts.

PAGE 1
Ceiling Projector Mount Plenum Cover CPM-PLC Form E-436 Rev. 08 / 10 Caution: This product is designed for ceiling installation only. Qualified personnel using the appropriate fasteners should mount the Plenum Cover. The surface to which this unit is mounted must be capable of supporting a static load of four times the combined weight of the projector and mount. Do not attach to plaster or drywall alone. Required Tools: - - 7/16” wrench Phillips screwdriver Procedure 1.
PAGE 2
A C B E H D 2. Follow the installation instructions of the CPMACP. 3. After securing the CPM-ACP, perform the electrical wiring internal to the Plenum Cover. 4. (Optional) Assemble Junction Box to the inside of the Plenum Cover in one of two possible locations. See Figure 1. Figure 1 5. Place the Plenum Cover inside of the CPM-ACP. See Figure 2. Figure 2 F 6. Attach the Plenum Cover to the CPM-ACP. See Figure 3. G Figure 3 7. Finish the electrical wiring. 8. Attach the Top to the Plenum Cover.