INSTRUCTION BOOK FOR Series 200 And 300 Lace And Grommet Frame
Installation Frame Assembly You will need a 9/16" wrench to assemble your Series 200/300 lace and grommet frame. If you have a split frame, you will also need a 3/16" allen wrench. Before beginning assembly make sure the work surface is clear of objects or debris that could scratch the frame or puncture the viewing surface. Use the wrapping material to lay the frame sections on to keep from scratching the frame. 1. Unwrap the frame sections and orient them as shown in the Figure below.
Series 200 Installation The Series 200 frame is supplied with eyebolts for ceiling installations and hanger brackets for wall mount installations. Ceiling Installation: The frame is predrilled for the attachment of the eyebolts. There are 3 eyebolts for smaller frames with a one-piece top frame rail. Larger frames with two-piece top frame rails will have 4 eyebolts. Insert the eyebolts through the frame and attach the hex nut to the eyebolt.
Series 300 Installation The Series 300 frame is supplied with eyebolts for ceiling installations and hanger brackets for wall mount installations. Ceiling Installation: The frame is predrilled for the attachment of the eyebolts. There are 3 eyebolts for smaller frames with a one-piece top frame rail. Larger frames with two-piece top frame rails will have 4 eyebolts. Insert the eyebolts through the frame and attach the hex nut to the eyebolt.
Split Frame Assembly 1. Loosely tighten set screw so that pieces will still move freely. See Figure 4. 4. Tighten first set screw the rest of the way. See Figure 6. 5. Finished joint should look like Figure 7. 2. Slide tube over connector and line up hole. See Figure 5. 3. Insert second set screw and tighten all the way until tube is secure. See Figure 6.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the factory.
