The Da-Lite Difference. Instruction Book for Da-Snap Screen DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 Toll Free Fax: 877-325-4832 www.da-lite.com e-mail: info@da-lite.
LARGE WALL BRACKET (47" LONG) Quantities vary by screen size: Screens 80" and smaller viewing width = 1 Screens over 80" to 96" viewing width = 2 Screens over 96" viewing width = 3 QUANTITY INCLUDED___________ Installation screws not included SMALL WALL BRACKET (8" LONG) Quantity of 1.
METHOD 1 (SCREENS 80" AND SMALLER IN VIEWING WIDTH) INSTALLATION There are four methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The wall bracket diagram shows the type and quantity of bracket that is supplied based on the size of the screen. Overall height Method 1: Screens 80" and smaller in viewing width.
METHOD 2 (SCREENS OVER 80" UP TO 96" IN VIEWING WIDTH) 1. Use the supplied #10 screws to attach four frame brackets to the back of the frame as shown in Figure 5. 5. Position the screen with the attached surface onto the top wall bracket as shown in Figure 7. Push down at the center of the bottom frame rail to hook onto the lower wall bracket. frame brackets 4-pieces 1 FIGURE 7 large Wall bracket 2-pieces wall #10 screws 8-pieces FIGURE 5 2.
METHOD 3 (SCREENS OVER 96" IN VIEWING WIDTH) METHOD 4 (HIGH POWER® FABRIC) 1. Use the supplied #10 screws to attach six frame brackets to the back of the frame as shown in Figure 8. 1. Use the supplied #10 screws to attach two frame brackets and two High Power® brackets to the back of the frame as shown in Figure 9. frame brackets 2-pieces 2. Secure the wall brackets to wall studs at the desired height. Make sure the brackets are level.
CLEANING Da-Tex®, Dual Vision, Pearlescent, Cinema Vision, High Power®, Da-Mat®, High Contrast Da-Mat®, Audio Vision, High Contrast Audio Vision, High Contrast Cinema Vision and High Contrast Cinema Perf surfaces can be cleaned as follows: Using a white clean cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one direction. Do not use a circular motion. Using a dry 100% cotton cloth, wipe dry after each cleaning session.
THIS PAGE IS INTENTIONALLY LEFT BLANK 6
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Da-Lite Screen Company, Inc. warrants its products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment from the factory.
