INSTRUCTION BOOK FOR Da-Snap Screen
Included Hardware Large Wall Bracket (47" Long) Installation screws not included Quantities vary by screen size: Screens 80" and smaller viewing width = 1 Screens over 80" to 96" viewing width = 2 Screens over 96" viewing width = 3 Small Wall Bracket (8" Long) Installation screws not included Quantity = 1. Only for screens 80" and smaller viewing width.
Installation There are four methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The wall bracket diagram shows the type and quantity of bracket that is supplied based on the size of the screen. Method 1: Screens 80" and smaller in viewing width.
Method 2 (Screens Over 80" Up To 96" In Viewing Width) 1. Use the supplied #10 screws to attach four frame brackets to the back of the frame as shown in Figure 5. Frame Brackets 4-Pieces Large Wall Bracket 2-Pieces 4. Unroll the screen on a clean surface. Do not use newspaper. The viewing side is rolled to the inside of the roll.
Method 3 (Screens Over 96" In Viewing Width) 1. Method 4 (High Power® Fabric) Use the supplied #10 screws to attach six frame brackets to the back of the frame as shown in Figure 8. 2. Secure the wall brackets to wall studs at the desired height. Make sure the brackets are level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. 1.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the factory.