INSTRUCTION BOOK FOR Fast-Fold® Deluxe Screen Frames Standard Leg
Procedure Da-Lite Fast-Fold® Deluxe frames are made of 1-1/4” square hard aluminum tubing with an anodized finish. With proper care they will provide many years of use. Please follow the set up instructions below (steps 1-6). 1. Remove the frame from its case and wrapping. Position it as shown (front view). Two Section Frame Three Section Frame 2. Unfold the frame following the directions given below so that it is lying flat, snap latches will automatically lock.
Procedure 3. While holding the bottom of the frame in place, lift the top of the frame to unfold the sides. Lock down all four corner braces. 11. To fold frame, unlock all four corner braces. Push the blue snap latch buttons and fold the frame. NOTE: for some frames fold the top and bottom first. 4. Lay the frame on the floor. 5. Match top of screen surface (labeled TOP) with top of frame. Top 6. Snap all four corners. 7. Starting at the bottom section, snap the center button.
Folding The Picture Surface For Packing When folding the screen material for packing, observe the following precautions before proceeding: 1. The surface should not be allowed to contact painted, varnished or plastic finished objects for a prolonged period of time. 4. After the top to bottom folding procedure is completed, then fold from left to right and continue folding until the fabric is of sufficient size to fit into the leatherette case. 2.
Theatre-Like Set Created With Fast-Fold® Presentation Drapery Accessories For a finished, professional appearance, Fast-Fold® screens can be dramatically enhanced with the Drapery Presentation Accessory Kit. Handsome velour drapes in a choice of three eye-catching colors surround the screen on four sides, providing an attractive stage front to the audience. The Presentation Drapery Accessory Kit serves a second function when used with a rear projection surface.
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to improper handling or treatment after shipment from the factory.