INSTRUCTION BOOK FOR IDEA™ Screen
Preparation Note: It requires two people to assemble an IDEA Screen. To maintain optimal projected image geometry and screen alignment, a flat and straight wall free from obstructions and angular distortions should be used. Choose a clean work area for assembly using padded material or other soft, clean materials. The work area should be larger than the overall screen size and directly in front of the location where the screen is to be installed.
Assembly Instructions for Screens with 24” Marker Tray 1. Carefully unpack unit and place assembly on top of the clean work area. The viewing surface must face up. 2. Center aluminum tray to the bottom of frame and attach with (3) of the provided #8 x ½” screws. Insert screws through the tray into the groove (Figure 1).
Wall Mounting Instructions for Screens with 24” Marker Tray NOTE: The screen is shipped with two wall brackets. Screens in widths of 84 ¾” and below receive (2) 28” wall brackets. Screens above 84 ¾” in width receive (2) 44” wall brackets. Use appropriate mounting hardware for the wall type and to accommodate for the screen’s hanging weight (Figure 2). 1. Secure the two wall brackets to wall studs at the desired height.
Wall Mounting Instructions for Screens with 24” Marker Tray (continued) 4. This step requires two people. Hang the screen on the wall brackets. There is a lip on the back of the frame that wedges itself into the wall brackets once fully installed. Ensure that the screen clears the L-brackets and that the screen weight is on the wall brackets, not the L-brackets. 6. Attach bottom of screen to wall through the mounting holes located under the tray. 5.
Assembly Instructions for Screens with Full Length Tray 1. Carefully unpack unit and place frame assembly on top of the clean work area. The viewing surface must face up. 2. Center the marker tray to the bottom of the frame and attach with (7) of the provided #8 x ½” screws (Figure 4). Insert screws through the tray into the groove.
Wall Mounting Instructions for Screens with Full Length Tray NOTE: The screen is shipped with two wall brackets. Screens in widths of 84¾” and below receive (2) 28” wall brackets. Screens above 84¾” in width receive (2) 44” wall brackets. Use appropriate mounting hardware for the wall type and to accommodate for the screen’s hanging weight. 1. 2. This step requires two people. Hang the screen on the wall brackets (Figure 5).
LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment from the factory.
