manual

ManualsBrandsDa-Lite ManualsProjector MountsPLC-38E

Projector Laptop Cart

PLC

38E

Form E-470

Rev.

Caution:

The user of this product should exercise

caution when moving the cart. Any sudden stop could

cause instability of the stand and could cause serious

injury and/or damage. The cart should always be pushed,

never pulled, by the user. Always push from the front or

back of the cart, never from the side of the cart.

Required Tools:

- 3/8” wrench

- Phillips screwdriver

- Flat screwdriver

Procedure

1. Remove contents from carton and examine for damaged or missing parts.

Summary of content (6 pages)

PAGE 1
Projector Laptop Cart PLC-38E Form E-470 Rev. Caution: The user of this product should exercise caution when moving the cart. Any sudden stop could cause instability of the stand and could cause serious injury and/or damage. The cart should always be pushed, never pulled, by the user. Always push from the front or back of the cart, never from the side of the cart. Required Tools: - 3/8” wrench Phillips screwdriver Flat screwdriver Procedure 1.
PAGE 2
PAGE 3
2. The PLC-38E is a versatile cart with several assembly options. This instruction sheet will guide you in assembling the cart shown on the cover sheet. Determine what your needs are and assemble according to your plan. See Figure 1 for one assembly option. Figure 1 3. It is easiest to assemble the cart upside down. Lay the Top Shelf upside down and attach the Sides. See Figure 2. The rectangles on the edges of the Sides should face toward the large hole in the Top Shelf.
PAGE 4
5 F 5. Attach the Base Tubes to the Sides. See Figure 4. Note the hole dimension on the Base Tubes. Leave fasteners loose at this time. 8.25 Figure 4 E 12 6. Attach the Bottom Shelf to the Base Tubes. See Figure 5. Leave fasteners loose at this time.
PAGE 5
6 A 7. Insert Caster stems into the caster sockets of the Base Tubes. See Figure 6. Insert rectangle Caps into Base Tube ends. Stand cart upright on Casters. Figure 6 B 8. Attach the Modesty Panel to the front of the Sides. See Figure 7. Insert the Grommet into the hole of the Top Shelf. C D Tighten all fasteners starting at the bottom and working your way to the top.
PAGE 6
2 D 9. Attach the Laptop Shelf Brackets to the Laptop Shelf. See Figure 8. 1 Figure 8 10. Determine the height needed for the Laptop Shelf. Insert the Brackets into the rectangle cutouts and rotate the shelf assemble down. See Figure 9. Figure 9 11. Install the electrical. See Figure 10. It may be placed on the inside (as shown) or the outside of the cart in several optional locations.