Equipment Installation Manual, GEN-X Electronic Flight Bag EQUIPMENT INSTALLATION MANUAL For the GEN-X Electronic Flight Bag P/N 1069-4000-01, RPU P/N 1069-48XX-XX, DU Rev D DAC International 6702 McNeil Drive Austin, TX 78729 ©Copyright 2005, DAC International. 1069-2510-01 D.doc 1069-2510-01 Rev D All rights reserved.
Equipment Installation Manual, GEN-X Electronic Flight Bag This page intentionally left blank. 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag RECORD OF REVISIONS REV IR A B C D DESCRIPTION Initial Release E633 Added Typical Ethernet Interconnections, Battery Checkout & Maintenance E709 Clarified Ground Names and Connections E713 Updated as per ECO E726-06 Add Optional Non-terminated Display Cable E748 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag This page intentionally left blank. 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag Table Of Contents RECORD OF REVISIONS.........................................................................................................................3 INTRODUCTION: ......................................................................................................................................7 DESCRIPTION:..................................................................................................................................
Equipment Installation Manual, GEN-X Electronic Flight Bag TYPICAL ETHERNET INTERCONNECTIONS:................................................................................23 INTERCONNECT FOR AIRCRAFT WITHOUT EMERGENCY BUSS:.........................................24 OUTLINE DRAWING:.............................................................................................................................25 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag INTRODUCTION: This manual contains installation data, specifications and Instructions for Continued Airworthiness for the DAC International GEN-X Electronic Flight Bag (EFB), consisting of Part Number 1069-4000-01, Remote Processor Unit (RPU) and 1069-48XX-XX, Display Unit (DU). DESCRIPTION: The DAC International GEN-X is designed to be a robust electronic flight bag.
Equipment Installation Manual, GEN-X Electronic Flight Bag PART NUMBERS: Gen-X RPU Mount: 1069-6001-01 Electronic Flight Bag Remote Processor Unit Mount Gen-X DU: 1069-48XX-XX Electronic Flight Bag Display Unit | | | | | \___ First digit is the color code of the display | | 01 = Grey, 02 = Black, 03 = Brown | | | \____ Second digit is the resolution capability of the display | 0 = 800 X 600, 1 = 1024 X 768 | \ ______Third and fourth digits represent display size 08 = 8”, 10 = 10”, 12 = 12” Gen-X Display
Equipment Installation Manual, GEN-X Electronic Flight Bag INSTALLATION KIT: Installation kits are available under kit part number 1069-4200-01. Individual pieces are available under the part numbers shown. Contact DAC International sales to place orders.
Equipment Installation Manual, GEN-X Electronic Flight Bag SPECIFICATIONS: Physical: The GEN-X RPU attaches to its mount through two .25” guide pins and a two lock turn wing nuts. The mount is attached to the airframe via four mounting holes. See the paragraph titled Outline Drawing for further details. RPU Height.................................................2.655” (Includes mounting flange) Width..................................................8.561” (Includes mounting flange) Depth...................
Equipment Installation Manual, GEN-X Electronic Flight Bag Data Input: ARINC 429 Baud Rate...........................................Auto Sensing Supported ARINC Data Labels ARINC 429 ====================== 743 BNR == 429 BNR === BCD Date ................................................ 260 Time ............................................... 150 125 Latitude ..................... 110 310 010 Longitude ................... 111 311 011 Altitude ..................... 370 076, 203, 204 Ground Speed ...........
Equipment Installation Manual, GEN-X Electronic Flight Bag OPERATION: The GEN-X System is a Windows based PC system which consists of a Remote Processor Unit and a Display Unit which are connected thru an LVDS cable. Inputs to the RPU include FMS data and Ethernet connectivity to a switch which will in turn allow communications to the second EFB, cameras and aircraft LAN or server systems. On-Off function is controlled through the power input logic described below.
Equipment Installation Manual, GEN-X Electronic Flight Bag REMOVAL AND REPLACEMENT: RPU Removal 1. Power down the GEN-X by opening its two RPU circuit breakers and wait approximately one minute for the system to power down. 2. Verify that the three RPU annunciators located on the connector side of the RPU are extinguished. 3. Remove the two connectors by twisting counterclockwise one quarter turn, then pulling the connector free. 4. Remove safety pin clip from front of mount by pulling sharply. 5.
Equipment Installation Manual, GEN-X Electronic Flight Bag DU Replacement 1. Attach mount stud body with four screws making sure to select the appropriate set of mounting holes on the display unit that will be nearest to the aircraft window. 2. Align red dots on DU connector and cable connector. Push together and verify positive lock. 3. Perform operational test of the GEN-X as prescribed in the aircraft maintenance manual. Battery Replacement 1. Remove RPU according to section “RPU Removal”. 2.
Equipment Installation Manual, GEN-X Electronic Flight Bag Battery Checkout The lithium ion battery installed in the Gen-X RPU is incased in a smart electronic package which eliminates the risk of overcharging during temperature extremes as well as monitoring the age and condition of the battery itself. When a condition exists that causes the battery to be incapable of performing its intended function, the battery monitor light on the RPU is lit yellow.
Equipment Installation Manual, GEN-X Electronic Flight Bag CONTINUED AIRWORTHINESS: This section provides data intended to assist the installer with establishing Instructions for Continued Airworthiness as required by FARs 23.1529, 25.1529, 27.1529 and 29.1529. 1.
Equipment Installation Manual, GEN-X Electronic Flight Bag 7. Electrical loads for this appliance are as specified in the DAC International Installation Manual, 1069-2510-01 (this manual). 8. There are no airworthiness limitations associated with the installation of this appliance. 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag ENVIRONMENTAL: The GEN-X meets the environmental test categories detailed below in accordance with RTCA/DO-160E, Environmental Conditions and Test Procedures for Airborne Equipment and 14 CFR 25.869 Code of Federal Regulations: Title 14 Aeronautics and Space; Subpart D – Design and Construction; Subsection 25.869 (a)(4) – Fire Protection Systems.
Equipment Installation Manual, GEN-X Electronic Flight Bag Standard/Section Category Remarks DO-160E (cont’d) 18.0 AF Conducted Susceptibility – Power Inputs 19.0 Induced Signal Susceptibility 20.0 Radio Frequency Susceptibility (Radiated and Conducted) 21.0 Emission of Radio Frequency Energy 22.0 Lightning Induced Transient Susceptibility 23.0 Lightning Direct Effects 24.0 Icing 25.0 ESD Code of Federal Regulations 14 CFR 25.
Equipment Installation Manual, GEN-X Electronic Flight Bag CONNECTOR PIN OUT: The GEN-X RPU contains three male connectors, J1 (Note: The mate for this connector is normally part of pre-made interface cable P/N 1069-4700-XX) Pin A B C D E F G H J K L M N P R S T U V Signal Power Common Aircraft Common DA 0 (-) DA 0 (+) DA 1 (-) DA 1 (+) DA2 (-) DA2(+) CLK CLK + LED 3 USB D0(-) USB D0(+) COM 2 TX COM 2 RX VMC 10 V + VMC 10 VPower Ground Power Ground Function Power Common Chassis Ground LVDS Data 0 (-) LVD
Equipment Installation Manual, GEN-X Electronic Flight Bag M N P R S T U V USB D1USB D1+ USB Common ARINC RX (A) ARINC Shield ARINC RX (B) ET2 Power Common USB Data 1(-) USB Data 1(+) USB Common 429 RX (A) ARINC Shield 429 RX (B) Ethernet wire 2 (Tx-) Power Common Red Common Red Green Blue Common Green Common Blue IDO Video Ground H- Sync ID1 ID2 V-Sync Sync Rtn ID3 VGA Red Common VGA Red VGA Green VGA Blue Common VGA Green Common VGA Blue IDO Video Ground Horizontal Sync ID1 or DDC Data ID2 Vertical S
Equipment Installation Manual, GEN-X Electronic Flight Bag TYPICAL INTERCONNECT: REMOTE PROCESSOR UNIT (RPU) DISPLAY UNIT (DU) GND GND A U GRAY WHITE 17 16 GND GND CLK+ CLK- K J WHITE PURPLE 10 9 CLK+ CLK- RXD (RS232) COM2 TXD (RS232) COM2 R P WHITE ORANGE 15 14 DA2+ DA2 H G WHITE GREEN 8 7 DA2+ DA2 DA1+ DA1- F E WHITE BLUE 6 5 DA1+ DA1- DA0+ DA0- D C WHITE YELLOW 4 3 DA0+ DA0- USBD0+ USBD0- N M BLACK BROWN 13 12 USBD0+ USBD0- IN SYSTEM PWR +V GND S B RED BROWN 18 2
Equipment Installation Manual, GEN-X Electronic Flight Bag TYPICAL ETHERNET INTERCONNECTIONS: CAT5E ETHERNET CABLE PIC WIRE & CABLE PN# E10424 OR EQUIV. J2 RR+ EFB #1 T+ T- J K L U ORG RR+ T+ T- WHT/ORG WHT/GRN GRN B HUB OR SWITCH J2 EFB #2 RR+ T+ T- J K L U ORG RR+ T+ T- WHT/ORG WHT/GRN GRN B TYPICAL STRAIGHT-THRU INTERCONNECT J2 RR+ EFB #1 T+ T- J K L U J2 ORG U L K J WHT/ORG WHT/GRN GRN B TT+ R+ R- EFB #2 B TYPICAL CROSS-OVER INTERCONNECT 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag INTERCONNECT FOR AIRCRAFT WITHOUT EMERGENCY BUSS: 28VDC RELAY MAIN BUSS 28VDC 1A AVIONICS BUSS 28VDC 5A REMOTE PROCESSOR UNIT (RPU) ESSENTIAL PWR +V AVIONICS BUSS C EMERGENCY PWR +V E CHASSIS GND D CHASSIS GND V 1N4007 DIODES (2) MAIN BUSS J2 1069-4000-01 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag OUTLINE DRAWING: 8 Inch Display Unit .400 2.756 .400 2.756 1.705 .420 1.820 9.900 2.756 1.170 .400 .588 6.900 3.156 I. 2.627 .485 .625 3.450 .799 4.272 .467 1.131 Note: Dimensions are in inches. 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag 1.170 .400 2.756 1.818 2.756 1.403 1.705 .415 .485 .625 1.815 2.756 8.130 .400 10 Inch Display Unit 3.156 II. 3.252 4.065 4.877 1.071 1.735 Note: Dimensions are in inches. 1069-2510-01 D.
Equipment Installation Manual, GEN-X Electronic Flight Bag III. Remote Processor Unit in Mount 6.900 11.900 12.810 12.500 2.412 2.655 8.634 7.875 Note: Dimensions are in inches. 1069-2510-01 D.
