Repair Manual

16
STARTING AND CHARGING
16 - 5
D
ISMOUNTING
Disconnect:
- battery;
-wires connected to the alternator.
Dismount:
- tightening screw (A );
- belt;
- attachment screw (B).
R
EMOUNTING
Mount: attachment screw (B) ,the belt, the tightening screw (A).
Tighten the belt.
Connect: wires to the alternator and the battery.
NOTE:
The belt will be tighten so to obtain the maximum arrow of 7,5 mm at half distance
between the water pump pulley and the alternator pulley. The excessive tightening of
the belt may lead to a premature wear of the water pump bearings and of the alternator
bearings.
ALTERNATOR
vnx.su