Repair Manual

16
STARTING AND CHARGING
16 - 7
D
ISMOUNTING
Disconnect: battery, wires connected to the alternator and the connections box from the
voltage electronic regulator.
Dismount: tightening screw (2) by acting on the locking nut, the tightened (3) by
unscrewing, the belt; pushing down the alternator,take out the alternator belt from the
pulley and the alternator attachment screw (1).
R
EMOUNTING
Mount: attachment screw (1), the V-belt, the tightening screw (2) and the tightener (3).
NOTE:
For dismounting/re mounting the alternator type 1180,perform same operations as
for alternator type 1114.200.For tightening and checking of the belt tightening see
chapt.07.
ATTENTION !
Do not tension exaggeratedly the belt ! Danger of premature wear both of alternator
bearings and of water pump bearings.
Connect: supply wires and chassis ground wires to the alternator, the connections box
at the electronic voltage regulator and the battery.
ALTERNATOR
vnx.su