Repair Manual

16
STARTING AND CHARGING
16 - 9
Checking is performed by means of a voltmeter connected according to the above
diagram,where you can identify:
B = battery , V = voltmeter, A = alternator , R = voltage regulator , Key = ignition
contact, Tb = instrument board.
For a voltage of 12,8 V read on instrument,
the needle of the voltmeter on the instrument
board must be placed in the left side of the
central area.
For a voltage of 13,5 V read on instrument,
the needle of the voltmeter on the instrument
board must be placed in the middle of the
central area ( white area ).
For a voltage of 15,6 V read on instrument,
the needle of the voltmeter on the instrument
board must be placed in the right side of the
central area.
CHEKING THE VOLTMETER OF THE INSTRUMENT BOARD
ALTERNATOR
vnx.su