Repair Manual

16
STARTING AND CHARGING
16 - 13
ALTERNATOR BEARINGS REPLACEMENT
Dismount the alternator from the vehicle.
A. FRONT BEARING REPLACEMENT
Dismount : pulley, washers and Grower washer, fan, pulley wedge and the drive shield.
Place the drive shield in a horizontal position and unscrew the three attachment screws
of the bearing cap and take out the bearing.
Mount the new bearing in the drive shield and
fix the bearing cap by means of the three screws.
Perform in reverse order the dismounting
operations of the alternator.
B. REAR BEARING REPLACEMENT
Dismount: pulley, washers and Grower
washer, fan, pulley wedge, brushes support
and front bearing – rotor assembly.
Extract the bearing by means of the
CV 28 A extractor provided with CV 48
clamps and RO 15.01 protector.
ALTERNATOR
vnx.su