Repair Manual

STARTING AND CHARGING
16
16 - 14
Place the protector RO 15.01 on the
rotor shaft end.
Mount the new bearing by means of a
press and using a tube, which shall rest
only on the inner ring of the bearing.
Assembly the alternator and then
mount it on the vehicle.
Mount the belt and adjust its tightening.
Connect the battery.
ALTERNATOR BRUSHES REPLACEMENT
D
ISMO UNTING
Disconnect the battery.
Unscrew the attachment screws of the
brushes support.
Dismount the used brushes off the support.
REMOUNTING
Mount the new brushes in their support.
Check: the sliding of the brushes in their
support, the insulation between brushes,
the continuity from the brushes contact
point with the collector up to the contacts
with chassis ground and excitation.
Mount the brushes support on the
alternator.
Connect the battery.
ALTERNATOR
vnx.su