Repair Manual

16
STARTING AND CHARGING
16 - 25
BENDIX REPLACEMENT
Dismount the starter.
Take out the rotor.
Move the stopping bushing by means of a
rod.
Take out the lock then the bendix.
Mount the new bendix , the stopping
bushing and the safety ring.
Grease with a thin coat of UM 185 Li2 grease the grooves, the area between the grooves
and the support ring the fork shaft and the rolling area of the coupling mechanism with the
fork.
Remount the rotor and adjust the fork stroke.
BRUSHES REPLACEMENT
Dismount the starter take out the collector bearing and the stator.
Take out the old brushes.
The minimum length of the brushes is 7 mm.
Stick the new brushes check the rotor and re mount the starter.
STARTER
vnx.su