Repair Manual

IGNITION AND INJECTION
17
17 - 18
The pin 23 should be tightly fixed to the mass.
The pin 16 is very important; it ensures a permanent supply (+) to the computer in order
to keep in its memory all the damages which might occur during the running and to introduce
the necessary connection at starting up for the ignition and injection system.
The system takes into consideration the wearing in time of the engine, introducing the
necessary correction factors for engine functioning under optimal parameters. When
reconnecting the battery, the computer rememorizes all the data sent by the sensors and the
possible damages of the system, after about 20 minutes of engine running.
The pins 33 and 18 are very important; they ensure the link between the computer
mass and the vehicle body.
DESCRIPTION OF THE SYSTEM
vnx.su