Repair Manual

17
IGNITION AND INJECTION
17 - 19
Pin no. Injection and ignition system component MA 1.7 Wire position in the
computer component connector
1 Control ignition coil ( cylinders 1 and 4 ) 3
2 Not connected -
3 Signal rotation sensor 2
4 Diagnosis plug ( line K ) 1
5 Not connected -
6 Not connected -
7 Not connected -
8 Idle switch 3
9 Signal oxygen rod 3
10 Signal oxygen rod 4
11 Valve potentiometer ( signal track 2 ) 4
12 Valve potentiometer ( signal track 1 ) 2
13 Sensor air temperature 1
14 Sensor engine temperature 1
15 Not connected -
16 Permanent supply ( + ) clamp 30
17 Supply ( + ) after contact, relay R2 clamp 87
18 Mass clamp 31
19 Control ignition coil ( cylinders 2 and 3 ) 1
20 Mass clamp 31
21 Signal rotation sensor 1
22 Control air conditioning -
23 Mass clamp 31
24 Speed-meter -
25 Valve potentiometer ( supply + 5 V) 5
26 Not connected -
Mass valve potentiometer 1
27 Mass engine temperature sensor 2
Mass air temperature sensor 4
28 Control relay fuel pump R1 clamp 86
29 Control canister purging valve 1
30 Control relay air conditioning R3 clamp 86
31 Control witness injection ( front panel ) -
32 Control idle regulator 1
33 Mass clamp 31
34 Control idle regulator 2
35 Control injector 3
Table no. 1
DESCRIPTION OF THE SYSTEM
vnx.su