Repair Manual

IGNITION AND INJECTION
17
17 - 26
A. DIAGNOSIS BY SAGEM CLIP TESTER
The injection and ignition system diagnosis can be done by using the SAGEM CLIP tester,
after connecting it to the diagnosis plug of the vehicle and after its + 12 V supply from the battery
terminals and from the lighter plug.
The detailed description of the tester as well as the diagnosis soft DACIA installing and their
operation mode are written on the CD no.1 joint to the tester purchase.
Additionally this tester can be purchased as a complex variant (CLIP TEHNIC), which serves
to the diagnosis of the injection system; it also serves for physical measurements of different
parameters of the injection and ignition system components.
B. DIAGNOSIS BY TESTER KTS 300
The injection and the ignition system diagnosis can also be done by means of the “Pocket –
System Tester KTS 300 – Bosch”.
The tester KTS 300 executes the following operations:
* processing of the communication structures;
* processing of the communication by electronic control unit (computer);
* selection of the memorized damages;
* selection of helping menu (HELP);
* processing of damage code by comparing the real and the set up values;
* checking of acting elements (actuators test).
The tester is provided with the following keys:
- the keys 1, 2, 3, are used for selecting a line from the option list, proposed by the
program at a certain moment;
- the keys > and < are used for shifting to the following screen or for returning to the
previous screen;
- the key H is the helping key for the following;
- screen lighting;
- meter stopping;
- displaying the data concerning the ignition and injection system;
-printer setting up;
- working speed setting for data transfer;
- the memorized data operations (printing, canceling).
- the key “ N ” - is used for shifting to the previous level of the program;
- the key “ - - > ” for data memorizing;
- the key “ - - > ” for memorized data reading.
DIAGNOSTIC
vnx.su