Repair Manual

IGNITION AND INJECTION
17
17 - 28
The next unit is activated with each pressing of the key “ 1 ”.
When pressing key “ 3 ” the working instructions for canceling the malfunctioning cause of
the unit will be displayed and by pressing the key
“ > ” the unit is reselected.
When pressing key “ N ”during the activation of a unit, one returns to the checking sub-range
of the activation units.
In case of choosing the displaying of the real values of the measured checking two options for
real values selection will be displayed by pressing the key “ 2 ”:
- press key “ 1 ” for selecting three parameters wit real values;
- press key “ 2 ”
for exploring one parameter in a raw, starting with the first one.
- press key “ > ” for selecting the next item of the list;
- press key “ N ” for returning to the sub-menu displaying the real values of the measured
elements.
Further information concerning the KTS 300 Tester are provided in the Instructions Book
“Pocket – System Tester KTS 300 Bosch”.
DIAGNOSTIC
vnx.su