Repair Manual

17
IGNITION AND INJECTION
17 - 31
DISMOUNTING
The connector is disconnected from the
rotation sensor by pressing the fuse (1),
arrow-sense and then it is dismounted.
The fixing screw of the sensor on the clutch
case is dismounted.
R
EMOUNTING
Reverse the above mentioned operations.
Functioning tests (testing of the rotation sensor functioning).
WARNING: In order to avoid its damaging, the sensor should be placed in the clutch
case by pushing, not by hammering.
The tightening strength of the fixing screw = 8 ± 2 Nm.
1
ROTATION SENSOR
vnx.su