Repair Manual

IGNITION AND INJECTION
17
17 - 32
D
ISMOUNTING
The injection control cables from the sensor
are disconnected by pushing the fuse (1),
arrow-sense and by dismounting it.
The sensor is dismounted.
R
EMOUNTING
Reverse the above mentioned operations. The cooling and the checking of the cooling liquid
level in the gas vessel are to be done.
Functioning tests (testing of the engine temperature sensor functioning).
WARNING! Avoid bumping the sensor.
The tightening of the sensor to the couple = max.18 Nm.
1
ENGINE TEMPERATURE SENSOR
vnx.su