Repair Manual

CLUTCH
20
CLUTCH FORK REPLACEMENT
Grease the fork shaft with UM 170 Li Ca Pb 2M.
Introduce the shaft with the sealing bushing.
Mount on shaft the new fork and the return spring.
Mount the fork attachment pins by means of the AMB 384 A device, observing the
value D = 1mm.
Mount the pressure bearing.
Remount the gearbox.
Adjust the clutch stroke ( 2,5 - 3,5 mm to end of control lever).
R
EMOUNTING
20 - 5
DISMO UNTING
Dismount the gearbox from the vehicle.
Dismount the pressure bearing.
Extract the attachment shaft of the
clutch fork by means of the AMB 384 A
extractor.
Dismount the fork spring and recover the
fork and the spring.
vnx.su