Repair Manual

MANUAL GEARBOX
21
21 - 17
Clean the annular oil seal place from
the differential cover.
Take out the cover (7) from the hub
differential.
Dismount the safety ring (8) from the
propeller shaft gear.
Take out slotted shim (9).
Extract the hub-gear assembly (10)
together with fork and shaft (11).
Take out the claw (12) and the pins
housing (13).
REPAIR
DISMOUNT THE VELOCITY STEP V
Dismount the flange attachment nut
flange on secondary shaft and take out the
flange (G.B. 50C , 51 C).
Bring the gearbox to the dead point and
dismount the back cap.
Engage the velocity step V and the
reverse one.
Unscrew the primary shaft nut.
Bring the gearbox to the dead point,
then engage velocity step IV.
Take out the speedometer spring by
means of CV 204 wrench at GB 365.
12
13 10 9 8 7
11
vnx.su