Repair Manual

MANUAL GEARBOX
21
21 - 19
REPAIR
FORKS AND SHAFTS DISMOUNTING
Bring the fork III - IV to the dead
point.
Dismount the speed V fork shaft and
recover :
- the interlocking ball between forks
shafts III -IV and V.
- the ball and the attachment spring of
the speed V fork shaft;
Dismount the elastic pin of fork III -
IV by means of the CV 31 B mandrel.
Take out the interlocking disk of the
forks shafts.
Engage speed I.
Move toward back the reverse driving
shaft.
Dismount the elastic pin of fork
I – II by means of the CV 31 B mandrel.
Dismount the shaft and the fork, recover
the attachment spring and ball.
Dismount :
- the reverse selector;
- the reverse driving shaft.
vnx.su