Repair Manual

MANUAL GEARBOX
21
21 - 23
REPAIR
Dismount:
- the lock ring of the speed II pinion;
- the speed II free pinion and its
synchronizer ring;
- the lock ring of the synchronizer
hub speeds I -II;
- the synchronizer tooth gear sliding
mechanism of speeds I – II (observe the
position of the gear sliding corresponding
to that of the synchronizer hub).
Dismount on a press, the hub of the
velocity steps I-II synchronizer, by means
of the TS 65 extractor.
Dismount:
- the lock ring of the speed I pinion;
- the synchronizer ring of speed I
pinion;
- the speed I free pinion.
IMPORTANT!
Place the maintaining device of the
bearing outer ring.
The bearing inner ring is stuck to
secondary shaft, so that the bearing
cannot be replaced.
vnx.su